Matrix-orbital GLT240128 Legacy Manual de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 70
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
Pin 2 RX/SCL (I
2
C clock)
Pin
3 TX/SDA (I
2
C data)
Pin 5 GND
Pin
9 PWR (Must solder power through DB-9 jumper. See table 78
Figure 15: RS-232 Pin-out
2.4 Power Through DB-9 Jumper
In order to provide power through pin 9 of the DB-9 Connector you must place a solder jumper on the
Power through DB-9 Jumper pictured in Figure 16 below. The GLT240128 allows all voltage models to use
the power through DB-9 option, see table 78 for display module voltage requirements.
Figure 16: Power Through DB-9 Jumper
WARNING Do not apply voltage through pin 9 of the DB-9 connector
AND through the Power/Data Connector at the same time.
NOTE We do not recommend that you use pin 9 (Ring Indicator) of the PC to power the
display module. You will have to make a special DB9 cable.
Matrix Orbital GLT240128 11
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 69 70

Comentarios a estos manuales

Sin comentarios