Matrix-orbital LK204-25 Legacy Manual de usuario Pagina 37

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 62
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 36
Description This command will set the startup state for the GPO on the next power
up. A value of one will cause the GPO to be off on the next startup
while a value of one will cause the GPO to be on.
NOTE This command does not affect the current state of the GPO.
Remembered Always
8 Dallas 1-Wire
8.1 Introduction
Another convenient feature of the LK204-25 is that it provides a Dallas 1-wire interface in order to
readily communicate with up to thirty two 1-wire devices on a single bus. 1-wire communication is begun
by discovering the address of the device that you wish to communicate with. To do this you must send the
“Search for a 1-Wire Device’ command. After you have established the address of the device that you wish
to communicate with, you may begin a transaction with the device
8.2 Search for a 1-Wire Device
Syntax
Hexadecimal 0xFE 0xC8 0x2
Decimal 254 200 2
Matrix Orbital LK204-25 33
Vista de pagina 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 61 62

Comentarios a estos manuales

Sin comentarios