Matrix-orbital LK204-25 Legacy Manual de usuario descargar pdf (Pagina 17)

Figure 20: Manual Override Jumper

Table 1: Default Values

Brightness 255

Baud Rate 19.2 kbps

C Slave Address 0x50

Data Lock False

RS232AutoTransmitData True

NOTE The display module will revert back to the old settings once turned off, unless the

settings are saved.

2.7 Keypad Interface Connector

The LK204-25 provides a Keypad Interface Connector which allows for up to a ﬁve by ﬁve matrix style

keypad to be directly connected to the display module. Key presses are generated when a short is detected

between a row and a column. When a key press is generated a character, which is associated with the

particular key press, is automatically sent on the Tx communication line. If the display module is running

in I

C mode, the “Auto Transmit Keypress” function may be turned off, to allow the key presses to remain

in the buffer so that they may be polled. The character that is associated with each key press may also be

altered using the “Assign Key Codes” command, for more detailed information see the Keypad Section, on

page 35.

Matrix Orbital LK204-25 13

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 61 62

Sin comentarios

Matrix-orbital LK204-25 Legacy Manual de usuario Pagina 17