
20
5.2 Dallas One-Wire
Transaction
254 200 1
FE C8 01
■ ╚ STX
Flags Send Bits Receive Bits Data
Flags Send Bits Receive Bits Data
Flags Send Bits Receive Bits Data
Performs a single Dallas 1-Wire transaction. Consult your device documentation for information regarding device
specific protocols. If an error is encountered, a corresponding value will be returned by the device.
Flags for transaction, see below.
Number of bytes to be sent to the device.
Number of bytes expected to be received from the device.
Data to be transmitted LSB to MSB.
Table 14: Dallas One-Wire Flags
Read CRC8 from transaction
Reset Bus prior to transaction
Table 15: Dallas One-Wire Errors
6.6 Keypad
6.1 Auto Transmit
Key Presses On
Key presses are automatically sent to the host when received by the display. Default is Auto Transmit on.
6.2 Auto Transmit
Key Presses Off
Key presses are held in the 10 key buffer to be polled by the host using the Poll Key Press command. Use this
mode for I2C transactions. Default is Auto Transmit on.
Reads the last unread key press from the 10 key display buffer. If another key is stored in the buffer the MSB will
be 1, the MSB will be 0 when the last key press is read. If there are no stored key presses a value of 0 will be
returned. Auto transmit key presses must be turned off for this command to be successful.
Value of key pressed (MSb determines additional keys to be read).
Comentarios a estos manuales