Matrix-orbital LCD2041 Legacy Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 33
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Pin 4 Ground
Pin 3 Rx
Pin 2 Tx
Pin 1 Vdc
Figure 11: Power Connector
2.2.3 TTL communications
The display can be talked to at TTL (logic 0V to +5V) levels. The following three jumps will need to be
modified as shown in figure below. This will allow TTL communications through the 4-pin SIP header or
the DB9 connector.
Figure 12: TTL Communications
2.2.4 Configuring RS-232 and I
2
C
RS-232 baud rate and I
2
C address are configured by means of jumpers.
Matrix Orbital LCD2041 8
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 32 33

Comentarios a estos manuales

Sin comentarios