Matrix-orbital VFD2041 Manual de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 53
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
Description This command turns the backlight off immediately. The backlight will
remain off until a ’Display On’ command has been received.
Remembered Yes
8.4 Set VFD Brightness
Syntax
Hexadecimal 0xFE 0x59 [brightness]
Decimal 254 89 [brightness]
ASCII 254 “Y” [brightness]
Parameters
Parameter Length Description
brightness 1 Brightness setting (0 to 3).
Description This command sets and saves the display’s brightness to [brightness],
where [brightness] is a value between 0x00
and 0x03 (between 0 and 3) according to the table below:
Value Brightness
0x03 25%
0x02 50%
0x01 75%
0x00 100%
If the remember function is on, this command acts the same as ’Set and
Save VFD Brightness’.
Remembered Yes
Default 255
8.5 Set and Save VFD Brightness
Syntax
Hexadecimal 0xFE 0x91 [brightness]
Decimal 254 145 [brightness]
Parameters
Parameter Length Description
brightness 1 Brightness setting (0 to 3).
Description This command sets and saves the display’s brightness to [brightness],
where [brightness] is a value between 0x00
and 0x03 (between 0 and 3) according to the table below:
Value Brightness
0x03 25%
0x02 50%
0x01 75%
0x00 100%
Remembered Always
Matrix Orbital VFD2041 36
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 52 53

Comentarios a estos manuales

Sin comentarios