
Command Summary 22
Brightness level from 0(Dim) to 255(Bright).
Set the way the display and keypad backlights respond when a key is pressed. The options in the tables below
allow a keypress to turn on the display and/or keypad backlights after they have timed out or been turned off.
What portions of the unit light on a keypress, if any, and if that press is returned.
Table 15: AutoBacklight Settings
6.7 Display Functions
Turns the display backlight on for a specified length of time. If an inverse display color is used this command will
essentially turn on the text.
Number of minutes to leave backlight on, a value of 0 leaves the display on indefinitely.
Turns the display backlight off. If an inverse display colour is used this command will turn off the text.
Brightness
Brightness
Brightness
Immediately sets the backlight brightness. If an inverse display color is used this represents the text colour
intensity instead. Default is 255.
Brightness level from 0(Dim) to 255(Bright).
7.4 Set and Save
Brightness*
Brightness
Brightness
Brightness
Immediately sets and saves the backlight brightness. Although brightness can be changed using the set command,
it is reset to this saved value on start up. Default is 255.
Brightness level from 0(Dim) to 255(Bright).
Comentarios a estos manuales