Matrix-orbital LCD/VFD Legacy Manual de usuario descargar pdf (Pagina 8)

Connector pinout is as follows;

Figure 4: Power Connector

Table 3: Connector Pinout

Pin 4 Ground

Pin 3 SDA (I

C data)

Pin 2 SCL (I

C clock)

Pin 1 +5.0 VDC (+7 to +15 VDC with wide voltage option)

2.1.2 Five Volt Modules

If the display is used in a PC it becomes tempting to plug a spare power connector into the unit. Don’t

do this! Wiring for the PC power connector and that required for the display are different as shown in the

Figure below.

Figure 5: Wiring for 5V Modules

Matrix Orbital can supply an adapter cable designed to use with the display when it’s installed in a PC.

The cable is wired as shown in the Figure below.

NOTE This cable does not provide connections for I

Matrix Orbital LCD4041 5

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

Sin comentarios

Matrix-orbital LCD/VFD Legacy Manual de usuario Pagina 8